Binders for paints and varnishes. Rosin. Sampling and sample preparation for colour measurement Ingestion-build-126766 The test shall be carried

The test shall be carried out within a temperature range of 10 °C to 35 °C

NOTE Every provision in this standard

Note: A test for the cutting ability of jointed cutting instruments other than scissors and shears is under consideration

testing to ensure water resistance is required

commissioning and maintenance of fire detection and fire alarm systems in non-domestic premises

Binders for paints and varnishes. Rosin. Sampling and sample preparation for colour measurement Ingestion-build-126766 The test shall be carried1 Scope This International Standard specifies a procedure for sampling of rosin and rosin derivatives from drums, the molten liquid form, flakes, pellets or pastilles and preparation of the samples for colour measurement. The method to be used for the colour measurement is specified in other standards. The colour of the rosin can be measured with neat rosin or rosin in solution. The two most commonly used colour measurement methods are those based on